Parkošanās sensors PS Visible set black GOLD 18mm AMIO-02992 (02992)

The camera sensor kit serves as a base for which you should select one of our LCD displays (P/N: 01020 or P/N: 02484) and one camera from our wide range.

It can also be connected to a car radio fitted with a PAL/NTSC system.

The parking assistant is a device designed to assist with parking and reversing. A versatile and tried-and-tested device for those who value road safety. The device is simple and functional, and activates automatically. Thanks to its ultrasonic sensors, you’ll never hit an object with your car again. When reversing or parking, the device accurately detects obstacles in the path and alerts the driver with an audible signal (proportional to the distance from the obstacle), whilst information is also displayed on the screen.

Device specifications

• Power supply: 12V DC
• Power consumption: lt;4W
• Operating frequency: 40 kHz
• Operating temperature: -30°C to +55°C
• Obstacle detection range: 2.5 – 0.3 m
• Measurement error: ±5 cm
• Cable length from sensors: 2.2 m
• Cable length from the display: 5 m

Contents of the set

• TFT control unit with connection to the display and camera
• sensors
• cabling
• mounting drill bit
• user manual

The kit includes sensors which can be positioned in any configuration at the front or rear of the car, thereby enhancing safety in your vehicle.

The sensors are activated automatically when reverse gear is engaged (for the rear sensors) or when the brake pedal is pressed (for the front sensors). The control unit is factory-calibrated.

The front sensors are activated by pressing the brake pedal (when the brake lights come on). Once the brake pedal has been pressed and released, the sensors remain active for 15 seconds. The system will activate if an obstacle is detected within 80 cm of the vehicle.

Detection of an obstacle is signalled by a distance display, a graphical indicator and, additionally, an audible alert via the built-in speaker.

The kit is fitted with high-quality flat-flange sensors.

The sensors are completely waterproof. They are also resistant to weather conditions such as snow, rain and fog.

If necessary, the sensors can be painted with 1–2 coats of paint (to be done by the user).

This is a universal product that fits most cars; we also stock extension cables for vans should the kit’s wiring prove to be too short.